Propagation of the degree of cross-polarization of stochastic electromagnetic pulsed beams in free space

The concept of the degree of cross-polarization is extended from stochastic electromagnetic stationary beams to stochastic electromagnetic pulsed beams, and the propagation properties of the degree of cross-polarization of stochastic spatially and spectrally partially coherent electromagnetic pulsed beams is studied. The influence of pulse duration and temporal coherence length on the degree of cross-polarization P is emphasized. It is shown that P exhibits an oscillatory behavior in free-space propagation. An increase in the pulse duration or a decrease in the temporal coherence length can weaken the oscillation of P. The validity of the results is interpreted physically.     

Enhanced photoluminescence of rare-earth doped films prepared by off-axis pulsed laser deposition

Alternate pulsed laser deposition from the host (Al₂O₃) and dopant (Er, Yb) targets has been used to prepare artificially nanostructured films in which the rare earth ion-ion separation is controlled in the nanometer scale in order to control energy transfer between ions. One series of films was prepared in the standard on-axis configuration, i.e. a static substrate being centred with respect to the plasma expansion axis. A second series of films was prepared by rotating the substrate with respect to a shifted axis parallel to the plasma expansion one (off-axis configuration). The latter configuration leads to films with enhanced thickness and Er related photoluminescence intensity uniformity. More interestingly, the Er related photoluminescence lifetime in as-grown films increases up to 2.5 ms, which is much higher than the maximum value of 1 ms obtained for the on-axis configuration films. This enhancement is discussed in terms of a decrease of defect density when using the off-axis configuration.     

Preparation of Ga-doped ZnO films by pulsed dc magnetron sputtering with cylindrical rotating target for thin film solar cell applications

Applicability of Ga-doped ZnO (GZO) films for thin film solar cells (TFSCs) was investigated by preparing GZO films via pulsed dc magnetron sputtering (PDMS) with rotating target. The GZO films showed improved crystallinity and increasing degree of Ga doping with increasing thickness to a limit of 1000 nm. The films also fulfilled requirements for the transparent electrodes of TFSCs in terms of electrical and optical properties. Moreover, the films exhibited good texturing potential based on etching studies with diluted HCl, which yielded an improved light trapping capability without significant degradation in electrical propreties. It is therefore suggested that the surface-textured GZO films prepared via PDMS and etching are promising candidates for indium-free transparent electrodes for TFSCs.     

Fabrication and lithium electrochemistry of InSe thin film

InSe thin film has been successfully fabricated by pulsed-laser deposition method. Electrochemical behavior of Li/InSe cell has been investigated by Galvanostatic cycling and cyclic voltammetry measurements for the first time. The reversible capacity of InSe electrode of 410 mAh/g with the volumetric capacity of about 3302 mAh/cm³ was achieved at a current density of 0.05 mA/cm². By using XRD and XPS measurements, both alloying/de-alloying processes and selenidation/reduction processes were revealed during the electrochemical cycling of InSe thin film electrode. InSe was found to be a novel candidate of anode materials for rechargeable lithium batteries.     

Structural characterization of AlN films synthesized by pulsed laser deposition

We obtained AlN thin films by pulsed laser deposition (PLD) from a polycrystalline AlN target using a pulsed KrF* excimer laser source (248 nm, 25 ns, intensity of ∼4 × 10⁸ W/cm², repetition rate 3 Hz, 10 J/cm² laser fluence). The target-Si substrate distance was 5 cm. Films were grown either in vacuum (10⁻⁴ Pa residual pressure) or in nitrogen at a dynamic pressure of 0.1 and 10 Pa, using a total of 20,000 subsequent pulses. The films structure was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and spectral ellipsometry (SE). Our TEM and XRD studies showed a strong dependence of the film structure on the nitrogen content in the ambient gas. The films deposited in vacuum exhibited a high quality polycrystalline structure with a hexagonal phase. The crystallite growth proceeds along the c-axis, perpendicular to the substrate surface, resulting in a columnar and strongly textured structure. The films grown at low nitrogen pressure (0.1 Pa) were amorphous as seen by TEM and XRD, but SE data analysis revealed ∼1.7 vol.% crystallites embedded in the amorphous AlN matrix. Increasing the nitrogen pressure to 10 Pa promotes the formation of cubic (≤10 nm) crystallites as seen by TEM but their density was still low to be detected by XRD. SE data analysis confirmed the results obtained from the TEM and XRD observations.     

Lead-free ferroelectric BaTiO3 doped-(Na0.5Bi0.5)TiO3 thin films processed by pulsed laser deposition technique

The difficulties in synthesizing phase pure BaTiO₃ doped-(Na_0.5Bi_0.5)TiO₃ are known. In this work, we reporting the optimized pulsed laser deposition (PLD) conditions for obtaining pure phase 0.92(Na_0.5Bi_0.5)TiO₃-0.08BaTiO₃, (BNT-BT_0.08), thin films. Dielectric, ferroelectric and piezoelectric properties of BNT-BT_0.08, thin films deposited by PLD on Pt/TiO₂/SiO₂/Si substrates are investigated in this paper. Perovskite structure of BNT-BT_0.08 thin films with random orientation of nanocrystallites has been obtained by deposition at 600 °C. The relative dielectric constant and loss tangent at 100 kHz, of BNT-BT_0.08 thin film with 530 nm thickness, were 820 and 0.13, respectively. Ferroelectric hysteresis measurements indicated a remnant polarization value of 22 μC/cm² and a coercive field of 120 kV/cm. The piezoresponse force microscopy (PFM) data showed that most of the grains seem to be constituted of single ferroelectric domain. The as-deposited BNT-BT_0.08 thin film is ferroelectric at the nanoscale level and piezoelectric.     

Thermo-optical response of layered Bi nanostructures produced by pulsed laser deposition

This work reports optical transmission changes in layered Bi nanostructures (NSs) upon heating-cooling cycles up to temperatures above the melting temperature. The nanostructured films prepared by pulsed laser deposition consist of Bi NSs with different characteristic sizes that are organised in layers and embedded in an amorphous Al₂O₃ host. The spectral dependence of the optical transmission as well as its changes upon heating are reported. The combination of Bi NSs layers with more than one characteristic size allows controlling the width of the melting-solidification transition. Eventually, it is shown how a multiple temperature thermo-optical film can be designed and prepared.     

Effects of phase explosion in pulsed laser deposition of nickel thin film and sub-micron droplets

Nickel (Ni) thin films were deposited on glass substrates in high vacuum and at room temperature with third-harmonic or 355-nm output from a nanosecond Nd:YAG laser. At low laser fluence of 1 J/cm², the deposition rate was about 0.0016 nm/shot which increased linearly until 4 J/cm². Above 4 J/cm², the onset of phase explosion in the ablation abruptly increased the optical emission intensity from laser-produced Ni plume as well as thin-film deposition rate by about 6×. The phase explosion also shifted the size distribution and number density of Ni droplets on its thin-film surface. On the other hand, the surface structures of the ablated Ni targets were compared between the scan-mode and the fixed-mode ablations, which may suggest that droplets observed on the thin-film surface were caused by direct laser-induced splashing of molten Ni rather than vapour-to-cluster condensation during the plume propagation.     

Characterization of ZnO-SnO2 thin film composites prepared by pulsed laser deposition

Thin films of ZnO-SnO₂ composites have been deposited on Si(1 0 0) and glass substrates at 500 °C by pulsed laser ablation using different composite targets with ZnO amount varying between 1 and 50 wt%. The effect of increasing ZnO-content on electrical, optical and structural properties of the ZnO-SnO₂ films has been investigated. X-ray diffraction analysis indicates that the as-deposited ZnO-SnO₂ films can be both crystalline (for ZnO <1 wt%) and amorphous (for ZnO ≥ 10 wt%) in nature. Atomic force microscopy studies of the as-prepared composite films indicate that the surfaces are fairly smooth with rms roughness varying between 3.07 and 2.04 nm. The average optical transmittance of the as-deposited films in the visible range (400-800 nm), decreases from 90% to 72% for increasing ZnO concentration in the film. The band gap energy (E_g) seems to depend on the amount of ZnO addition, with the maximum obtained at 1 wt% ZnO. Assuming that the interband electron transition is direct, the optical band gap has been found to be in the range 3.24-3.69 eV for as-deposited composite films. The lowest electrical resistivity of 7.6 × 10⁻³ Ω cm has been achieved with the 25 wt% ZnO composite film deposited at 500 °C. The photoluminescence spectrum of the composite films shows a decrease in PL intensity with increasing ZnO concentration.     

Enhanced dielectric permittivity in poly (vinylidene) fluoride/multiwalled carbon nanotubes nanocomposite thin films fabricated by pulsed laser deposition

The fabrication of high quality thin films of poly (vinylidene fluoride) embedded with multiwalled carbon nanotubes using pulsed laser deposition technique is reported. The prepared films were characterized for structural, morphology and dielectric properties. The morphology analysis revealed uniform dispersion of multiwalled carbon nanotubes throughout the polymer matrix. X-ray diffraction results suggested that the poly (vinylidene fluoride) film is in amorphous phase while addition of multiwalled carbon nanotubes showed presence of crystalline peaks in the nanocomposites films. It was interesting to note that the nanocomposite films exhibits significant enhancement of the ferroelectric β-phase as evidenced by the X-ray diffraction and Fourier transform infrared spectroscopy results. The dielectric analysis shows a remarkable enhancement in the dielectric permittivity of nanocomposites with lower loss and conductivity level. The results can be attributed to the formation of minicapacitor network and relatively higher percolation threshold in the nanocomposites.